5x112 Mercedes Hubcentric Wheel Spacers - 12 mm (Thin Lip CB 66.6)

Important Notice

These specific wheels spacers are designed for all Mercedes with 5x112 PCD, 66.6 mm center bore, fitted with long hubcentric flanges on the hubs (see photos). Many vehicles are concerned, in particular the newer Mercedes S-Class, but the distribution of this type of hub still seems random today. We advise you to check directly on your vehicle. If in doubt about the compatibility with your car, do not hesitate to contact us!

How to choose the correct bolts for my car ?

Attention : when using these spacers, longer bolts are required (see options above). For your safety, do not use original wheel bolts ! The length of the new bolts must be at least equal to the length of the old bolts + the thickness of the wheel spacer. Caution: bolts that are too short may loosen, while bolts that are too long may not fit or damage hub components. Given the wide range of models and any modifications already made to your vehicle, we recommend removing an original bolt to calculate the new length you need. The length is always measured under the head (see photo above).