Wisefab Rear Knuckle Kit for BMW 3 Series F30 & F31 (11-19)
Revised rear kinematics!
Ask a question about this productWisefab Rear Knuckle Kit for BMW 3 Series F30 & F31 (11-19)
By completely revising rear kinematics, Wisefab have created the ultimate rear knuckle kit for BMW F chassis. By correcting roll centre, lowering anti-squat and revising camber gain/bump steer, this kit will give you the ultimate in terms of stable, usable traction.
All components are made from high strength steel, and the kit uses rose joints and spherical bearings throughout.
Kit contents :
- Rear knuckles
- Rear suspension arms and links
- All fittings required for installation
Notes regarding fitment: This kit requires lower springs or coilovers. M model or 336mm or bigger brake discs are needed. Wheel bearing size should be 45x85x41. E90 halfshafts need to be used. OEM wheel speed sensor can be used. Minimum wheel size is 17".
Characteristics
| Car Make | BMW |
|---|---|
| Car Model | BMW 3 Series F30 / F31 (11-19) |
| Manufacturer | Wisefab |
Wisefab was founded by a collective of drifters in Estonia, who noticed that there were no lock kits available for popular European models, especially BMWs. Following the success of their first kits for E30 and E36 models, Wisefab's engineers quickly expanded their range with kits for the E46 and E90 models, as well as other manufacturers like Nissan (S13, S14, S15, 350Z, 370Z, R33), Toyota (Supra, Soarer, GT86), Mazda (RX-7, RX-8)...