Wheel Guide Alignment Tool (M14x1.25)

Wheel Guide Alignment Tool Specifications

This handy tool makes wheel changes easier on vehicles featuring studless hubs. This task is even more difficult when the vehicle is fitted with spacers: aligning the hub, the spacer and the wheel in order to get the first lug bolt in can be a real nightmare!

Preserve your back! Thanks to this guide, you no longer have to hold the wheel between your legs during this operation, trying as hard as you can to guess where those pesky holes are in order to get the first lug bolt through. Simply mount the wheel on the guide, which takes care of supporting and aligning it to the hub, then place and tighten the wheel bolts.

Also known as a wheel hanger, this guide has a knurled and drilled end for easy tightening or loosening by hand or by inserting a tool. It is suitable for all vehicles with wheel bolts featuring M14x1.25 thread (BMW, Porsche, Mercedes, Audi, Volkswagen, Seat, Skoda...).

How to use

1. Screw the guide into one of the lug holes closest to the 12 o’clock position.
2. Align and put the wheel on the hub by passing one of the holes through the guide.
3. Tighten the wheel using the other bolts.
4. Take the guide off.
5. Install and tighten the last bolt.
6. Put the vehicle back on the ground.
7. Tighten the bolts using factory torque specs.