Turbosmart Gen 4 Wastegate Spring

$Turbosmart\u0020Gen\u00204\u0020Wastegate\u0020Spring$

Some options are available below Please check them before adding to the cart

Turbosmart Wastegate Springs

To suit Turbosmart Gen 4 external wastegates
Allows you to achieve your target boost pressure
Several spring pressures available
Color coded for easy identification
Quick and easy to install
Sold individually

Ask a question about this product

Free delivery to France from 50 € (see conditions here)

Your Choice *Please fill in this field.
1 x Turbosmart Gen 4 Wastegate Spring for WG38/40/45/50L - 3 psi (0.2 bar), Brown/Black, Inner +€41.99 (Dispatched under 20 to 27 days)
1 x Turbosmart Gen 4 Wastegate Spring for WG38/40/45/50L - 5 psi (0.3 bar), Brown/Grey, Inner +€41.99 (Dispatched under 20 to 27 days)
1 x Turbosmart Gen 4 Wastegate Spring for WG38/40/45/50L - 7 psi (0.5 bar), Brown/Purple, Middle +€41.99 (Dispatched under 20 to 27 days)
1 x Turbosmart Gen 4 Wastegate Spring for WG38/40/45/50L - 11 psi (0.8 bar), Brown/Red, Middle +€41.99 (Dispatched under 20 to 27 days)
1 x Turbosmart Gen 4 Wastegate Spring for WG38/40/45/50L - 10 psi (0.6 bar), Brown/Blue, Outer +€41.99 (Dispatched under 20 to 27 days)
1 x Turbosmart Gen 4 Wastegate Spring for WG38/40/45/50L - 7 psi (0.5 bar), Brown/Pink, Outer +€41.99 (Dispatched under 20 to 27 days)

€0.00

Turbosmart Gen 4 Wastegate Springs Specifications

These Turbosmart springs to suit the manufacturer's Gen 4 external wastegates allow to quickly achieve your target boost pressure to optimize your forced induction system. In addition to helping to reduce the overall wastegate size and significantly improve the sealing of the diaphragm housing, the threaded locking collar unique to the manufacturer's Gen 4 units also makes springs swap less tedious than before.

Several spring combinations may be required to reach the boost pressure of your choice. The Gen 4 wastegate diaphragm housing is grooved so it can accommodate up to 3 different springs: inner, middle, outer. To achieve your target pressure, Turbosmart recommends you to use your Gen 4 external wastegate in conjunction with the manufacturer's e-Boost controller.

Springs are available for the following Turbosmart wastegates:

Ultra-Gate Gen 4 38 mm
Comp-Gate Gen 4 40 mm
Hyper-Gate Gen 4 45 mm
Wastegate interne IWG75

Characteristics

Manufacturer	Turbosmart