Turbosmart 80 mm Clevis for IWG75 Wastegate Actuator
Dispatched under
20 to 27 days, as of Thursday, January 8, 2026
Turbosmart 80mm Clevis
- For Turbosmart IWG75 internal wastegate
- Clevis length : 80 mm
- Thread : 1/4 UNF
- Mounting hole diameter : 6.3 mm
- Allows precise mechanical adjustment of actuator
- Manufactured by Turbosmart
Ask a question about this product
Free delivery to France from 50 € (see conditions here)
80mm Clevis for IWG75 Wastegate Actuator Specifications
The Turbosmart 6.3 mm × 80 mm ¼″ UNF clevis is designed for use with internal wastegate actuators from the IWG75 range. It allows precise adjustment of actuator, ensuring accurate tuning of your boost control system.
During installation, make sure the final stroke is correctly set and that the clevis does not apply any lateral load on the shaft. After assembly, verify that the actuator operates smoothly without any binding, and that the wastegate spring or stop adjustment remains within specifications.
Characteristics
| Manufacturer | Turbosmart |
|---|