SpeedSocket Wheel Nut - M12x1.25

Discover in Video!

SpeedSocket Wheel Nuts Specifications

Manufactured from forged chromoly 4140 steel, these nuts are designed to work with the SpeedSocket tool. To ensure the proper functioning of the SpeedSocket, it is mandatory that the wheel stud is flush with the nut once tightened with the wheel in place (see diagram above). If your studs are too long, two solutions are available:

• Cut your studs to the appropriate length, and chamfer them (we offer many OEM replacement studs, may you need to revert to original length in the future)
• Choose extended SpeedSocket nuts, which allow 10 mm thread to protrude from the end of the nut. End nipples (non-threaded part) will not affect operation.

Warning ! For your own safety, always ensure that the nuts are using enough thread on the studs. Nuts should be flush with the studs when torqued to the wheel on the car. These standards SpeedSocket nuts are compatible with wheels in 3, 4, 5 or 6-hole PCD.