ACL Race Series Reinforced Main Bearings - Nissan CA18DET
ACL Race Series Main Bearings
- ACL trimetal main bearings
- To suit high RPM/load applications
- Offer reduced friction and operating temperatures
- Increased oil supply and overall lubrication
- To fit : Nissan CA18DET - full application list below
- Made in Australia
Engineering Bulletin
ACL provides an official guide for clearance control and optimization, and guidelines for bearing size selection : download it here.
ACL Race Series Reinforced Main Bearings
Designed to withstand high RPM, temperatures and load, these ACL Race Series bearings are manufactured from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.
To help engine builders optimise clearances for their specific applications, ACL provides a range of different bearing sizes for standard crankshaft journal sizes:
- H-STD: Bearing thickness is precision finished to provide a nominal clearance based on OEM specifications. Suitable for all applications using crankshafts finished to OEM specifications.
- HX-STD: Providing an extra .001" (0.025mm) of clearance over the H-STD size bearings. Suitable for high to extreme power applications where additional clearance is beneficial to part reliability.
- H-001 / H-.025: Providing a reduction of .001" (0.025mm) of clearance over the H-STD size bearings. Suitable for adjusting clearance to compensate for surface reconditioning (polishing) of crankshaft journals or the use of low viscosity lubricants.
Please note: there are also HD (with location dowel holes) and HXD (with location dowel holes and 0.025mm (0.001") extra clearance) part numbers, reserved for some connecting rod bearing applications only.
Application List & Engine Codes
- Ford/Corsair/SOHC 8v/NIssan CA20E
- Nissan/Bluebird/SOHC 8v/CA16
- Nissan/Exa/DOHC 16v/CA16DE
- Nissan/Gazelle/SOHC/CA18
- Nissan/Exa, Silvia/DOHC 16V/CA18DE
- Nissan/Bluebird, Silvia/SOHC 8v Turbo/CA18ET
- Nissan/180SX, Silvia/DOHC 16v Turbo/CA18DET
- Nissan/Bluebird Series 3, Gazelle, Pintara , Ford Corsair/SOHC 8v/CA20E
- Nissan/Bluebird Series 3/SOHC 8v/CA20S
- Nissan/Sunny, Pulsar/SOHC 8v Diesel/CD17
- Nissan/Sunny, Pulsar, Serena, Primera/SOHC 8v Diesel/CD20
- Nissan/Serena, Primera/SOHC 8v Turbo Diesel/CD20-T
Characteristics
Car Make | Ford, Nissan |
---|---|
Bearing Type | Main Bearings |
Engine Code | CA16DE, CA18ET, CA18DE, CA18DET |
Customer Reviews 6 customer reviews
star star star star star
-
star star star star star100% (6)
-
star star star star starProduct ordered on 30/07/2018 by Sebastien F.Very good quality
-
star star star star starProduct ordered on 11/02/2016 by Jovhanny p.Very good
-
star star star star starProduct ordered on 02/04/2015 by association o.RAS
-
star star star star starProduct ordered on 09/02/2015 by Laurent M.Very good to prepare an engine !
-
star star star star starProduct ordered on 11/01/2015 by Sylvain P.Good stuff at a very good price!
-
star star star star starProduct ordered on 30/09/2014 by Arthur M.Nothing to say about the quality of the acl parts!
Customer Reviews
star star star star star
6 reviewsDesigned to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.