GReddy RX1200 Turbo Kit for Nissan GT-R R35

GReddy RX1200 Turbo Kit for Nissan GT-R R35 Specifications

With its extensive experience in the field of turbocharging, GReddy offers high-quality kits specially designed to boost the performance of standard turbocharged engines. These kits are mainly characterized by turbos larger than the original equipment in order to allow the engine to produce more power and torque.

Developed for the VR38DETT engine of the Nissan GT-R R35, this kit consists of two TD06SH-25G-C 10cm² (20G housing) turbochargers, enabling a maximum power output of 1200 horsepower. The exhaust manifold uses a crack-resistant, 3mm-thick, 48mm stainless steel elbow welded type, achieving a significant weight reduction of approximately 6.9kg for both sides.

Two kit settings are available when ordering: return or open type wastegate, depending on your driving style. The TiAL 38mm V-Band wastegate is particularly compact and allows the flywheel housing to be replaced without removing the exhaust manifold, making maintenance easier. Several springs are included, allowing you to select the best rate to match your desired boost.

Caution: The factory primary catalytic converter cannot be retained, but the secondary catalytic converter can. To install this kit, you must fit the GReddy aluminium intake pipe set sold separately for the R35 GT-R suction kit (part number: 12020942). A genuine exhaust manifold gasket is required and is not included.

Kit Contents

• 2x TD06SH-25G-C 10cm² (20G housing spec.) turbos
• Exhaust manifold ⌀48mm SUS elbow welded
• 2x front pipes ⌀60mm / ⌀70mm SUS
• TiAL ⌀38mm V-Band type wastegate
• Suction tube ⌀70mm aluminium (buffed finish)
• 2x compression tube ⌀60mm aluminium (buffed finish)
• 2x Airinx AY-S air filters
• Wastegate release pipe ⌀42.7 mm SUS (open kit only)