DriftMax Steering Lock Kit for BMW E36

DriftMax Steering Lock Kit for BMW E36 Specifications

• Complete "plug & play" kit with lower arms, tie-rods and ends, top mounts, steering knuckles, hubs and bearings
• 70° lock angle
• Zero Ackerman effect
• Reduces bump steer 
• 35 mm of roll centre correction
• Adjustable lock limiters
• Requires non-M brakes, either from E36 or E46 (for better clearance)
• Made in Europe, designed with the latest technology and laser cut

This steering lock kit for BMW E36 is exclusive to DriftShop. Unlike our competitors, the kit is totally "plug & play", and delivered in the entire form of the front axle, complete with hubs and bearings. Offering a lock angle of up to 70°, designed to work with the OEM steering rack, without any modifications.

The DriftMax knuckles have been manufactured to raise the roll center back to its stock position on lowered vehicles, for perfect alignment and absolute control, even at steering lock limit where the wheels are perfectly aligned and parallel (zero Ackerman effect and reduced bump steer).

Installation tip:
- The installation of the DriftMax Steering Lock Kit for BMW E36 widens your tracks by approximately 35mm per side.
(This measurement is observed in 99% of cases and on vehicles in 100% original configuration before assembly.)
- Ideally, we will announce the following fitment: Wheel size 17x7.5 ET30, tires maximum 225/40 R17.

All the accessories required for the installation (bolts and brackets) are made from high quality steel, for optimal resistance and long life. All spare parts are available on demand and are permanently in stock.

Kit contents :

• Steering knuckles
• Hubs and bearings
• Lower arms
• Tie-rods
• Meyle tie-rod ends (BMW Motorsport OEM)
• Aviation quality aluminium top mount relocators
• Required bolts and accessories