Extra Rear Calipers Bolt-In Adapters for Nissan 350Z (CNC71)

CNC71 Rear Dual Caliper Adapter Kit for Nissan 350Z Specifications

Offered by CNC71, this kit of adaptor brackets for the Nissan 350Z allows an extra pair of rear callipers to be fitted without welding and without any special modifications. The brackets are designed using a 3D scanner and manufactured in PA9 7075 aluminium on CNC machines, ensuring a perfect fit to the car.

This kit can be fitted with original Nissan or Brembo calipers (optional on the 350Z), as well as other calipers. It is then possible to install a hydraulic handbrake on an entirely separate and independent circuit, a great solution for drift use.

It is not necessary to disassemble the hubs to install these adaptor brackets. However, the ABS sensor must be removed. It is essential to clean the contact surfaces thoroughly before fitting the brackets to the control arms using the screws and hardware supplied.

Half-shaft spacers can be purchased to make the most of this kit, an option recommended to maintain the correct length of the half-shaft, which will ensure that it works properly and does not affect the transmission's performance in the long term.