ACL Reinforced Thrust Bearings - Toyota 2K, 3K, 4K, 5K
ACL Uprated Thrust Washers
- ACL trimetal thrust bearings
- To suit high RPM/load applications
- Offer reduced friction and operating temperatures
- Increased oil supply and overall lubrication
- To fit : Toyota 2K, 3K, 4K, 5K - full application list below
- Made in Australia
Ask a question about this productEngineering Bulletin
ACL provides an official guide for clearance control and optimization, and guidelines for bearing size selection : download it here.
ACL Reinforced Thrust Bearings
Designed to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.
Available on selected applications, Calico's CT-1 coating provides intermittent dry lubrication, unaffected by dust or dirt, which helps to reduce friction and abrasive wear. It is specially designed to withstand the extreme conditions of modern high-performance engines.
These bearings, also called thrust washers, are sold in standard sizes and, depending on the part number, in repair sizes.
Application List & Engine Codes
- Toyota/1000 1.0/OHV 8v/2K
- Toyota/1000 Estate 1.0/OHV 8v/2K
- Toyota/Starlet 1.0/OHV 8v/2K
- Toyota/Starlet 1000 1.0/OHV 8v/2K
- Toyota/Starlet 1000 Kombi 1.0/OHV 8v/2K
- Toyota/Starlet Estate 1.0/OHV 8v/2K
- Toyota/Corolla Estate 1.2/OHV 8v/3K
- Toyota/Corolla 1.3/OHV 8v/4K
- Toyota/Corolla Estate 1.3/OHV 8v/4K
- Toyota/Corolla Liftback 1.3/OHV 8v/4K
- Toyota/Liteace Van 1.3/OHV 8v/4K
- Toyota/Liteace Wagon 1.3/OHV 8v/4K
- Toyota/Starlet 1.3/OHV 8v/4K
- Toyota/Corolla Estate 1.3/OHV 8v/4K-C
- Toyota/Liteace Van 1.3/OHV 8v/4K-C
- Toyota/Liteace Bus 1.5/OHV 8v/5K
- Toyota/Litace Bus 1.5/OHV 8v/5K
- Toyota/Litace Van 1.5/OHV 8v/5K
Characteristics
| Car Make | Toyota |
|---|---|
| Bearing Type | Thrust Bearings |
| Engine Code | 2K, 3K, 4K, 5K |
Designed to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.