ACL Reinforced Thrust Bearings - Nissan YD22DDT, YD25DDTi (Almera, Primera, Pathfinder)
ACL Uprated Thrust Washers
- ACL trimetal thrust bearings
- To suit high RPM/load applications
- Offer reduced friction and operating temperatures
- Increased oil supply and overall lubrication
- To fit : Nissan YD22DDT, YD25DDTi (Almera, Primera, Pathfinder) - full application list below
- Made in Australia
Ask a question about this productEngineering Bulletin
ACL provides an official guide for clearance control and optimization, and guidelines for bearing size selection : download it here.
ACL Reinforced Thrust Bearings
Designed to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.
Available on selected applications, Calico's CT-1 coating provides intermittent dry lubrication, unaffected by dust or dirt, which helps to reduce friction and abrasive wear. It is specially designed to withstand the extreme conditions of modern high-performance engines.
These bearings, also called thrust washers, are sold in standard sizes and, depending on the part number, in repair sizes.
Application List & Engine Codes
- Nissan/ALMERA II/DOHC 16v/YD22DDT
- Nissan/PRIMERA/DOHC 16v/YD22DDT
- Nissan/X-TRAIL/DOHC 16v/YD22DDT
- Nissan/ALMERA II/DOHC 16v/YD22DDTi
- Nissan/X-TRAIL/DOHC 16v/YD22DDTi
- Nissan/BASSARA/DOHC 16v/YD25DDTi
- Nissan/MURANO/DOHC 16v/YD25DDTi
- Nissan/NAVARA D22/DOHC 16v/YD25DDTi
- Nissan/NAVARA D40/DOHC 16v/YD25DDTi
- Nissan/PATHFINDER III R51/DOHC 16v/YD25DDTi
- Nissan/PRESAGE U30/DOHC 16v/YD25DDTi
- Nissan/SANI/DOHC 16v/YD25DDTi
- Nissan/SERENA C24/DOHC 16v/YD25DDTi
- Nissan/TERRA/DOHC 16v/YD25DDTi
Characteristics
| Car Make | Nissan |
|---|---|
| Bearing Type | Thrust Bearings |
| Engine Code | YD22DDT, YD25DDTi |
Designed to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.