ACL Reinforced Thrust Bearings - Mini One & Cooper (S) R56
ACL Uprated Thrust Washers
- ACL trimetal thrust bearings
- To suit high RPM/load applications
- Offer reduced friction and operating temperatures
- Increased oil supply and overall lubrication
- To fit : Mini One & Cooper (S) R56 - full application list below
- Made in Australia
Ask a question about this productEngineering Bulletin
ACL provides an official guide for clearance control and optimization, and guidelines for bearing size selection : download it here.
ACL Reinforced Thrust Bearings
Designed to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.
Available on selected applications, Calico's CT-1 coating provides intermittent dry lubrication, unaffected by dust or dirt, which helps to reduce friction and abrasive wear. It is specially designed to withstand the extreme conditions of modern high-performance engines.
These bearings, also called thrust washers, are sold in standard sizes and, depending on the part number, in repair sizes.
Application List & Engine Codes
- Mini/Cooper R56/DOHC v16/N12B16
- Mini/Cooper R55/DOHC v16/N12B16
- Mini/Cooper R57/DOHC v16/N12B16
- Mini/Cooper R55/DOHC v16/N14B16
- Mini/Cooper R56/DOHC v16/N14B16
- Mini/Cooper R57/DOHC v16/N14B16
- Mini/Cooper R58/DOHC v16/N14B16
- Mini/Cooper R56/DOHC v16/N16B16
- Mini/One R56/DOHC v16/N16B16
- Mini/Cooper R55/DOHC v16/N16B16
- Mini/One R55/DOHC v16/N16B16
- Mini/Cooper R57/DOHC v16/N16B16
- Mini/One R57/DOHC v16/N16B16
- Mini/Cooper R60/DOHC v16/N16B16
- Mini/One R60/DOHC v16/N16B16
- Mini/Cooper R58/DOHC v16/N16B16
- Mini/Cooper R61/DOHC v16/N16B16
- Mini/Cooper R59/DOHC v16/N16B16
- Mini/Cooper S R56/DOHC v16/N18B16
- Mini/Cooper S R55/DOHC v16/N18B16
- Mini/Cooper S R57/DOHC v16/N18B16
- Mini/Cooper S R60/DOHC v16/N18B16
- Mini/Cooper S R58/DOHC v16/N18B16
- Mini/Cooper S R61/DOHC v16/N18B16
- Mini/Cooper S R59/DOHC v16/N18B16
Characteristics
| Car Make | Mini |
|---|---|
| Bearing Type | Thrust Bearings |
| Engine Code | N12B16A, N14B16A, N16B16A, N18B16A |
Designed to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.