💡 Our gift ideas 🎁
CUSTOMER REVIEW 4,8/5 ON AVIS VÉRIFIÉS

ACL Duraglide Reinforced Main Bearings - Mazda 2.2L Diesel

ACL * generic picture
Some options are available below Please check them before adding to the cart

ACL Duraglide Main Bearings

  • ACL trimetal main bearings
  • To suit high RPM/load applications
  • Offer reduced friction and operating temperatures
  • Increased oil supply and overall lubrication
  • To fit : Mazda 2.2L Diesel - full application list below
  • Made in Australia
  • Your choice *Please fill in this field.
€0.00

Engineering Bulletin

ACL provides an official guide for clearance control and optimization, and guidelines for bearing size selection : download it here.

ACL Duraglide Reinforced Main Bearings

Designed to withstand higher loads than OEM parts, these ACL Duraglide bearings are made from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.

To help engine builders optimise clearances for their specific applications, ACL provides a range of different bearing sizes for standard crankshaft journal sizes :

  • STD: Bearing thickness is precision finished to provide a nominal clearance based on OEM specifications. Suitable for all applications using crankshafts finished to OEM specifications.
  • 001 / .025: Providing a reduction of .001" (0.025mm) of clearance over the STD size bearings. Suitable for adjusting clearance to compensate for surface reconditioning (polishing) of crankshaft journals or the use of low viscosity lubricants.

Application List & Engine Codes

  • Mazda/3 Saloon (BM_, BN_)/2.2 D/SH-VPTR
  • Mazda/6 Estate (GJ, GL)/2.2 D/SH-VPTR
  • Mazda/6 Estate (GJ, GL)/2.2 D 4WD/SH-VPTR
  • Mazda/6 Saloon (GJ, GL)/2.2 D/SH-VPTR
  • Mazda/6 Saloon (GJ, GL)/2.2 D 4WD/SH-VPTR
  • Mazda/CX-5 (KE, GH)/2.2 D/SH-VPTS
  • Mazda/CX-5 (KE, GH)/2.2 D 4WD/SH-VPTS
  • Mazda/6 Estate (GJ, GL)/2.2 D/SHY1
  • Mazda/6 Estate (GJ, GL)/2.2 D/SHY4
  • Mazda/6 Estate (GJ, GL)/2.2 D/SHY6
  • Mazda/6 Estate (GJ, GL)/2.2 D/SHY8
  • Mazda/CX-5 (KE, GH)/2.2 D/SHY1
  • Mazda/CX-5 (KE, GH)/2.2 D/SHY4
  • Mazda/CX-5 (KE, GH)/2.2 D AWD/SHY1
  • Mazda/3 (BM, BN)/2.2 D/SHY4
  • Mazda/3 (BM, BN)/2.2 D/SHY6
  • Mazda/3 Saloon (BM_, BN_)/2.2 D/SHY4
  • Mazda/3 Saloon (BM_, BN_)/2.2 D/SHY6
  • Mazda/6 Estate (GJ, GL)/2.2 D AWD/SHY4
  • Mazda/6 Estate (GJ, GL)/2.2 D AWD/SHY6
  • Mazda/6 Estate (GJ, GL)/2.2 D AWD/SHY8
  • Mazda/6 Saloon (GJ, GL)/2.2 D/SHY1
  • Mazda/6 Saloon (GJ, GL)/2.2 D/SHY4
  • Mazda/6 Saloon (GJ, GL)/2.2 D/SHY6
  • Mazda/6 Saloon (GJ, GL)/2.2 D/SHY8
  • Mazda/3 (BM, BN)/2.2 D/SH-VPTR
  • Mazda/3 (BM, BN)/2.2 D 4WD/SH-VPTR
  • Mazda/3 Saloon (BM_, BN_)/2.2 D 4WD/SH-VPTR
  • Mazda/6 Estate (GJ, GL)/2.2 D AWD/SH-VPTR
  • Mazda/6 Saloon (GJ, GL)/2.2 D AWD/SH-VPTR
  • Mazda/CX-5 (KF)/2.2 D/SH-VPTS
  • Mazda/CX-5 (KF)/2.2 D AWD/SH-VPTS
  • Mazda/CX-8 (KG)/2.2 D/SH-VPTS
  • Mazda/CX-8 (KG)/2.2 D 4WD/SH-VPTS
  • Mazda/6 Estate (GJ, GL)/2.2 D AWD/SHY1
  • Mazda/CX-5 (KE, GH)/2.2 D AWD/SHY4
  • Mazda/CX-5 (KF)/2.2 D AWD/SHY8
  • Mazda/CX-5 (KF)/2.2 SKYACTIV-D/SHY8
  • Mazda/CX-5 (KF)/2.2 Skyativ-D AWD/SHY8

Characteristics

Car Make Mazda
Bearing Type Main Bearings
Engine Code SH-VPTR, SH-VPTS

Designed to withstand high RPM, temperatures and load, these high strength bearings are manufactured by ACL from 3 layers of hardened steel, copper and nickel. This "trimetal" composition substantially lowers friction, and thus reduces the operating temperatures while providing superior lubrication.