Accusump Electric Pressure Control Valve 2.4~2.8 bar (35~40 psi)
Dispatched under
10 to 15 days, as of Thursday, May 15, 2025
This item is made in the United States !
Accusump EPC valve
- Allows remote operation of the accumulator
- The accumulator can be operated automatically depending on the mounting choice
- Rapid refill rate of the accumulator ideal for competition
- Opens when the pressure is between 2.4 and 2.8 bar (35-40 psi)
- 1/2" NPT female thread in and out ports with built-in 1/4" NPT pressure sensor port
Ask a question about this productAccusump 2.4~2.8 bar EPC Valve Specifications
This EPC (Electric Pressure Control) valve controls the oil flow between the engine and the Accusump accumulator. This ideal racing solution combines the convenience of a standard electric valve with the fast refill rate of a manual valve.
To maximise the amount of oil available, this device opens to allow oil to be discharged only when the pressure drops below a predetermined level. Refilling occurs when the pressure rises above that level.It is important to select a valve with a pressure switch that is below your warm idle oil pressure so the Accusump will not be discharging at idle. Yet you must also pick a valve with a pressure setting close enough to your normal operating pressure.
This kit contains a 1/2" NPT female threaded electric valve, a 1/2" NPT nipple, a 2.4~2.8 bar (35~40 psi) EPC regulator, a switch, a cable, lugs and installation instructions.
Characteristics
| Manufacturer | Accusump |
|---|
Specializing in the production of engine parts and accessories, Canton Racing Products is particularly well known for its Accusump oil pressure accumulators. These products, manufactured in the United States, pre-oil and protect the engine in the event of an oil surge, and offer a benefit for road use as well as for track and competition use.