Turbosmart Universal Wastegate Actuator (IWG75)
Turbosmart IWG75 Actuator
- To suit turbochargers with internal wastegate
- Improved boost and response throughout the RPM range
- High grade billet aluminum construction
- Silicon diaphragm
- Springs rate : 10 psi (0.7 bar)
- Stainless steel rods and clevis
- Brand specific locking collar system
- Thread : M6, 140 mm
- Made in Australia
Turbosmart IWG75 Wastegate Actuator 10 psi Specifications
This Turbosmart IWG75 internal wastegate actuator makes the most of your turbocharger's capabilities by significantly improving its response and boost pressure over the entire RPM range. With the increased diaphragm size and new spring rate, the actuator is also able to handle boost and back pressure more efficiently.
When used with the standard boost pressure, the Turbosmart actuator is able to widen the boost and torque curve through peak boost being achieved earlier in the RPM and being held longer, into higher RPM. Pressure management is also more precise.
This universal product with M6 140 mm long thread is compatible with a large number of turbochargers with internal wastegate. Some fabrication is likely required, including additional hardware such as clevis and brackets.